AutomationDirect Technical Support
AutomationDirect | Direct Sales in US and Canada | 1-800-633-0405

Power Products (electrical) Frequently Asked Questions AutomationDirect Logo


Press "Ctrl-F" to search for specific words in this FAQ.

Would you prefer to narrow the list of Power Products (electrical) FAQs? Select a category from this list:

  • Power, I/O, and Wiring

Click here to view all Power Products (electrical) FAQs with answers on one page.

  1. What is the difference between switching and linear power supplies?
  2. What is the difference between grounding and bonding?
  3. What is a ground loop?
  4. Are there any standards for electrical installations?
  5. Do the PS series power supplies have an isolated ground or is the negative leg of the output tied to ground either directly or indirectly by a passive or active component?
  6. Do the PS-series power supplies have a voltage adjustment pot? If so, where is it located?
  7. Do you have SCCR (Short Circuit Current Rating) specifications for your power supplies?
  8. Can I get multiple voltages from your Hammond control transformers?
  9. How does the PSM24-BCM360S prevent deep discharge of the battery(batteries)?
  10. What are the mounting dimensions for the SD1 and SD2 series disconnects when using the shafts and handles?
  11. Can I use two 2 Rhino power supplies in parallel to get more current?
  12. Can I use two Rhino power supplies in parallel for redundancy?
  13. Can we use two 24V power supplies connecting in series instead of one 48V power supply?
  14. Can I use my retired Eaton WMZS/WMZT series accessories with my new FAZ/FAZ-NA series Supplementary protectors and Miniature circuit breakers?


Troubleshooting Guides


Copyright © 1999- AutomationDirect.com. ALL RIGHTS RESERVED