OPC/DDE server Frequently Asked Questions
OPC/DDE server Frequently Asked Questions
| Question | On DSDATA, I'm attempting to use two NICs in my PC, getting CSMain error. |
| Answer | Edit the ds300.ini/ds400.ini file and disable COM settings and retry. If it works, there is a conflict with the COM ports. If it doesn't work, edit the files again disabling Ethernet links. If it works, then there is a conflict between the NICs. You may want to look at our app note on comm probblems here: http://support.automationdirect.com/docs/an-ds-002.pdf |
FAQ Subcategory:
This item was last updated on 02-06-2004
Document ID: 960
The information provided in the AutomationDirect knowledge base is provided "as is" without warranty of any kind. AutomationDirect disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall AutomationDirect or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if AutomationDirect or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion of limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.