AutomationDirect Logo SureStep Drives and Motors Frequently Asked Questions

« Return to the FAQ index

Question Do you have cable pinouts for connecting the SureStep drives to PLCs?
Answer
Click, D0-05 & P3000
PORT 2 DRIVE
Pin 3 (RX) Pin 3 ( TX )
Pin 4 (TX) Pin 5 ( RX )
Pin 1 ( 0v Gnd ) Pin 2 ( Gnd)
D0-06, 250, 250-1, 260
PORT 2 DRIVE
Pin 2 (TX) Pin 5 ( RX )
Pin 3 (RX) Pin 3 ( TX )
Pin 7 ( 0v Gnd ) Pin 2 ( Gnd)
Jumper 
Pins 4 and 5
together
350
PORT 2 DRIVE
Pin 2 (TX) Pin 5 ( RX )
Pin 3 (RX) Pin 3 ( TX )
Pin 7 ( 0v Gnd ) Pin 2 ( Gnd)
Jumper 
Pins 4 and 5
together
450
PORT 1 DRIVE
Pin 2 (TX) Pin 5 ( RX )
Pin 3 (RX) Pin 3 ( TX )
Pin 7 ( 0v Gnd ) Pin 2 ( Gnd)
Jumper 
Pins 4 and 5
PORT 2 DRIVE
Pin 3 (RX) Pin 3 ( TX )
Pin 4 (TX) Pin 5 ( RX )
Pin 1 ( 0v Gnd ) Pin 2 ( Gnd)

FAQ Subcategory:

This item was last updated on 10-20-2009
Document ID: 1248

The information provided in the AutomationDirect knowledge base is provided "as is" without warranty of any kind. AutomationDirect disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall AutomationDirect or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if AutomationDirect or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion of limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.