AutomationDirect Stepper Support Resources
SureMotion Pro completely replaces SureStep Pro. SureMotion Pro can configure all Advanced SureStep Drives and all Advanced Integrated SureStep Drives.
SOFTWARE UPDATE NOTIFICATION: Sign up for our software update e-mail notification service to be notified of updates to SureMotion Pro Software.
Current Version: 1.0.3
Download File (File Size = 112 MB)
Leadshine's Pro Tuner for EM-S Series Drives is an optional configuration software that allows the user to modify the EM542S and EM556S drives’ motor phase current (Amps) and step resolution (PPR setting) to values not selectable by the hardware DIP switches on the drive. The Windows-based software requires an RS-232 port (USB-RS232 adapter works well) and cable 1.4.4-0409505-B3. This configuration utility does not have an installation utility: copy the folder to your hard drive and run the exe file.
Please read this AutomationDirect software Quick Start Guide: QuickStart Guide for EM-S Series ProTuner.pdf
Current Version: 1.56
Download File (File Size = 9 MB)
Leadshine's Pro Tuner for DM805-AI Drives is an optional configuration software that allows the user to modify the DM805-AI drive’s motor phase current (Amps) and step resolution (PPR setting) to values not selectable by the hardware DIP switches on the drive. The Windows-based software requires an RS-232 port (USB-RS232 adapter works well) and cable 1.4.4-0609505-B3. This configuration utility does have an installation utility.
Please read this AutomationDirect software Quick Start Guide: QuickStart Guide for DM805 Series ProTuner.pdf
Please download the Leadshine software User Manual: DM805-AIsm_P.pdf
Current Version: 1.0
Download File (File Size = 3 MB)
In most instances, the STP-USB485-4W will be recognized by Windows when the adapter is plugged into a USB port and the appropriate drivers will be automatically installed. If the drivers are not automatically installed by Windows, please download and install these drivers.
Current Version: CDM v2.12.10 WHQL
Download File (File Size = 2 MB)
AMT ViewPoint will configure STP-MTRA-ENC9, STP-MTRA-ENC10, and all CUI Devices' AMT encoders. This software requires an AMT-PGRM-17C or AMT-PGRM-18C programming cable, a PC running Windows 7 or later, and an up-to-date Microsoft .NET Framework. (Available from www.microsoft.com/net).
Current Version: 2.0.4.0
Download File (File Size = 41.0 MB)
SureStep Pro has been replaced by SureMotion Pro (see above). Use SureMotion Pro for all SureStep Advanced steppers (new and old). SureStep Pro is a legacy product and will not be maintained after July, 2018.
Current Version: 1.0.8
Download File (File Size = 19.2 MB)
UnZip the file into a folder of your choice. Run the "Sure Step PRO 1.0.8.exe" file to begin installation.