Question

Is it necessary to be on line to setup the secondary communication port?

Answer

Yes/No. A PC can be connected and online to setup the secondary communication port of any of our PLCs. However, you can have the ladder code configure the secondary communication port for some of the Koyo PLCs on the first scan.

Please refer to Application Note AN-D2-002

---

FAQ Subcategory: None

This item was last updated on 2021-02-17
Document ID: 456

---

The information provided in the AutomationDirect knowledge base is provided "as is" without warranty of any kind. AutomationDirect disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall AutomationDirect or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if AutomationDirect or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion of limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.