Question

What do the lights on the top and bottom of the OP-9001 mean?

Answer

There are three lights (actually bi-colored LED's). The LED that is found between the J6 and J7 port indicates whether or not communications is occurring between the 9001 and the PLC. If the color of the LED is amber, transmitting and receiving is occurring. When configuring the 9001 this LED will not be lit, except during the actual download.

The other two LED's next to port J2 and J3 indicate the status of communication between the 9001 and the panel(s). Again, amber indicates transmitting and receiving, whereas green indicates the 9001 is seeking a panel or panels for which it has been configured.

---

FAQ Subcategory: None

This item was last updated on 2000-10-17
Document ID: 173

---

The information provided in the AutomationDirect knowledge base is provided "as is" without warranty of any kind. AutomationDirect disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall AutomationDirect or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if AutomationDirect or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion of limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.