AutomationDirect Technical Support
AutomationDirect | Direct Sales in US and Canada | 1-800-633-0405

C-more Frequently Asked Questions AutomationDirect Logo


Question

Can a 90/30 CPU (IC693CPU311) be used with a C-more or C-more Micro Panel ?

Answer

It depends on the firmware in the CPU 311.
CPU 311 firmware before 4.40 did not support SNP-X.

SNP (Series Ninety Protocol) is not the same as SNP-X (Series Ninety Protocol Express) and will not work with the C-more



If you use our cable or cable wiring diagram pay close attention to the cable ends. The cable is not symmetrical and it has a panel and plc end. Our cable is labeled to reflect this.. It will not work properly if flipped.



FAQ Subcategory: None

This item was last updated on 2013-10-23
Document ID: 1328


The information provided in the AutomationDirect knowledge base is provided "as is" without warranty of any kind. AutomationDirect disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall AutomationDirect or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if AutomationDirect or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion of limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.


Copyright © 1999- AutomationDirect.com. ALL RIGHTS RESERVED