C-more Frequently Asked Questions
Question
Why can I 'Browse' and list my panel in the Online Link List, but I can not transfer a project to it. The Transfer Button is inactive.
Answer
Your PC network interface card (NIC) in your PC may have a different subnet than the panel.For example;
- Your NIC may have an IP address of 198.162.5.6 and a subnet mask of 255.255.0.0.
- The panel may have an IP address of 10.1.33.6 with a subnet mask of 255.255.0.0.
The NIC's Subnet is 192.168.0.0 and the panels subnet is 10.1.0.0. These must match in order to transfer a project to the panel.
There is a video that explains IP Address Basics
FAQ Subcategory: Communications
This item was last updated on 2021-02-18
Document ID: 1079
The information provided in the AutomationDirect knowledge base is provided "as is" without warranty of any kind. AutomationDirect disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall AutomationDirect or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if AutomationDirect or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion of limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.