AutomationDirect | Direct Sales in US and Canada | 1-800-633-0405
DirectLogic MIL Testing Specifications
Due to the fact that some of the testing equipment is not available in Japan, Koyo's products are tested to comply to the MIL standards with a few differences described below.
Vibration test (MIL STD 810C 514.2)
| Koyo (comply to MIL STD) | MIL STD | |
|---|---|---|
| Vibration range: | 10 to 500Hz | 5 to 500Hz |
| Acceleration: | 1.5G | 1.5G |
| Test Method: | Apply vibration with 1.5G for 30 min. at resonance. | Apply vibration with 1.5G for 30 min. at resonance. |
Shock test (MIL STD 810C 516.2)
| Koyo (comply to MIL STD) | MIL STD | |
|---|---|---|
| Peak Acceleration: | 50G | 40G |
| Duration: | 11ms | 11ms |
| Test Method: | Apply shock twice for each direction, x, y, and z axis. | Apply shock twice for each direction, x, y, and z axis. |
| Operating Power: | Not applied. | Applied. |
Vibration test (MIL STD 810D 514.2)
| Koyo (comply to MIL STD) | MIL STD | |
|---|---|---|
| Vibration range: |
10 to 500Hz |
5 to 500Hz |
| Acceleration: | 1.5G | 1.5G |
| Test Method: | Apply vibration with 1.5G for 30 min. at resonance. | Apply vibration with 1.5G for 30 min. at resonance. |
Shock test (MIL STD 810D 516.2)
| Koyo (comply to MIL STD) | MIL STD | |
|---|---|---|
| Peak Acceleration: | 50G | 40G |
| Duration: | 11ms | 6-9ms |
| Test Method: | Apply shock twice for each direction, x, y, and z axis. | Apply shock twice for each direction, x, y, and z axis. |
| Operating Power: | Not applied. | Applied. |