AutomationDirect Logo EZTouch Panels Frequently Asked Questions

« Return to the FAQ index

Question There is an LED located on the back of my panel, what does the different mode of colors mean?
Answer
    Apply power while observing the LED in the back of the panel.
  1. LED does not light means: NO POWER to unit or power supply failed. Check power supply or replace.
  2. LED turns RED and stays RED means: Unit failure, contact Tech Support for further diagnosis or replacement.
  3. LED flashes RED and turns GREEN means: normal operation.

FAQ Subcategory:

This item was last updated on 10-02-2009
Document ID: 451

The information provided in the AutomationDirect knowledge base is provided "as is" without warranty of any kind. AutomationDirect disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall AutomationDirect or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if AutomationDirect or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion of limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.